Blockfix

Floor Hardner Cora Exim
Floor Hardner
February 12, 2021
Tiles Fixture / Fixo Cora Exim
Tiles Fixture / Fixo
February 12, 2021
Blockfix Cora Exim

Application:

  • Lay out the wall where Super Ajanta Blockfix's is to be used and mark opening like door, windows.
  • Apply a thin uniform layer of Super Ajanta Blockfix's 3-4 mm thick on the clean and level surface of masonry unit using proper trowel.
  • Place the next course of masonry units on the evenly laid jointing mortar bed in proper line and level.
  • Each masonry unit shall be properly bedded and set in position
    by gently pressing with the handle of trowel After placing the first units apply Super Ajanta Blocktix's of same thickness on both the side of the unit. Check for lines & levels.
  • Inside face of the masonry unit shall be buttered with mortar before the next unit is laid and pressed against is especially in case of bricks.
  • Clean the excess material, if any immediately continue the procedure for the entire masonry work.

Advantages:

  • Thinner jointing material with very high adhesive strength improve overall masonry strength and load bearing capacity Pre-mixed and ready to use. Only water is to be added at site.
  • Eliminates lengthy process of site mixing, transport and storage of all individual material.
  • No water curing is required after application.
  • East to mix much faster to apply due to its superior flow ability and water retention properties.
  • Thinner layer of application for lesser shrinkage and seamless structure.
  • Economical quality of mortar is far less than conventional mortar.
  • Seepage/water percolation through joints is negligibie due to integrity of mortar joints with masonry units.
  • Ready to subsequent application like plastering just after 24 Hr. of application Raking of joints is not required before plastering.
  • Raw materials are process reducing the chances of efflorescence.
  • Super Ajanta Blockfix's is made from eco friendly material.

 

Available  :

  • 20 KG

Uses:

Versatile thin jointing material for laying AAC Blocks, concrete Blocks, Fly ash bricks, etc.

This Mortar is specially designed to provide stronger, much more durable bonding between the blocks and superior adhesive strength. It replaces conventional cement and sends mix mortar. Laying and jointing of masonry units like fly ash bricks, concrete blocks, hollow blocks, AAC blocks, etc.

Contact : +91 70169 92078.